RC Toys Online

I had repeated complaints about the WASP 3 Helicopters servos moving uncontrollably, and the helicopter spinning, and with little control. I asked Skyartec about it. Their comments were;

Check for correct tail rotor rotation, (belt could be in wrong).

Servo correct setting should be in the center, perhaps a little to the right.

I followed the suggestions, and found that the belt was in wrong. I placed the setting as instructed. When I did that the heli was fine.

I have found that sometimes the little parts in the tail rotor are a little too tight, and need to be loosened.

You also need to be sure that ALL batteries are in good condition. If they are low, it may cause some unusual behaviour.

If you have other RC Helicopter issues please contact; http://www.skyartec.com/Server.asp

Doug; www.qualityrchobbies.com